Material

Thickness: 0.3-0.8mm

Effective width：According to drawing

Material: PPGI/GI/Aluminium

Power supply

480V, 60HZ, 3 Phase

Capacity of power

Motor power: 5.5kw;

Hydraulic station power: 7.5kw

Speed

15m/min

Quantity of rollers

about 21-26

Control system

PLC control system;

Control panel: Button-type switch and touch screen;

Capacity: 3 tons 

Diameter range: 300-450mm

Way of de-coiling: passive

Input width adjustable, Guiding system consists of several rollers, and the width between them could control by the manual rollers.

l Matching material: GI/PPGI/color steel;

l Wall panel structure; Chain drive, frequency conversion speed regulation.

l Material thickness range: 0.3-0.8mm (Manual screw adjustment);

l Motor power: 5.5kw;

l Hydraulic station power: 7.5kw;

l Forming speed: 15m/min;      

l Quantity of rollers: about 21-26;                                         

l Shaft Material and diameter: ￠70mm, material is 45# steel;

l Tolerance: 3m+-1.5mm;

l Controlling system: PLC;

l Voltage: according to the requirment of client;

l Material of forming rollers: 45# forge steel , coated with chromed treatment;

l Cutting device

After forming, it is cut off by the upper and lower bidirectional cutter oblique shear mode, and no waste is generated;

Cutting knife material: Cr12 quenching treatment;

The cut-off power is provided by the hydraulic station.

l Bending device

This device can bend the downpipe into the required arc, which can be bent up and down or left and right, and the mold needs to be changed manually when changing the direction;

Material of bending die: Cr12 quenching treatment;

Bending power is provided by hydraulic station.

l Shrinking device

This device can reduce the downpipe port, which is convenient for overlapping;

Shrinking die material: Cr12 quenching treatment;

The necking power is provided by the hydraulic station